Intel® µFC-PGA 478 Pentium® M and Celeron® M Processors

Intel Pentium M Processor ETX Module with High End Graphics and Optional TV-out

Intel Celeron M ETX Module with High End Graphics and Optional TV-out

Ultra Low Power AMD Geode GX2 ETX Module

Intel Pentium III - Low Power and Ultra Low Voltage Intel Celeron Processor ETX Module with AGP 8X

ETX Prototype Board with ATX Form Factor

A fully integrated Host-Target environment that works alongside your Embedded Linux distribution of choice

VIA SOM-ETX CPU Module with VIA Ezra & Eden CPU up to 800MHz, VGA, LCD/LVDS, Audio & LAN.

Intel SOM-ETX with Pentium® III & Celeron CPU up to 700MHz, VGA/LCD, Audio & LAN

NS SOM-ETX CPU Module with Geode GX1 CPU up to 300MHz, VGA, LCD/LVDS, Audio & LAN

Development Board for SOM-ETX

SiS SOM-ETX CPU Module with SiS552 CPU up to 200MHz, VGA, LCD/LVDS, Audio & LAN.

*ETX 3.0 Compliant *4 x PCI and 3 x ISA expansion *Supports VGA, S-Video, Composite Video and LVDS *Supports 2 x IDE and 1 x CF *One 10/100Mbps Ethernet interface *RoHS

*Low power consumption (Intel® Atom™ N450 CPU + Chipset) *Intel® Atom™ N450, D510, D410 processor *Dual display by BGA and LVDS *ETX 3.02 coompatible *Two SATA interface on module

Key Features: *Intel® Pentium® M/ Celeron® M processor *One 200-pin DDR SO-DIMM socket supports up to 1GB *10/100Mbps Ethernet interface *Supports CRT/LVDS interface *AC 97 audio

Key Features: *AMD Geode LX800 500MHz processor *One 200-pin DDR SO-DIMM socket supports up to 1GB *10/100Mbps Ethernet interface *Supports CRT, 18-bit TTL / 24-bit LVDS *AC 97 audio *1 x Ultra ATA 66 and 1 x CompactFlash *Watchdog timer and system monitoring

Key Features: *Embedded Intel Core 2 Duo processor *One 200-pin DDRII SO-DIMM socket supports up to 2GB *10/100Mbps Ethernet interface *Supports CRT, 18-bit TTL / 24-bit LVDS *High definition audio *Two SATA interface on module *Watchdog timer and system monitoring

Intel Pentium M CPU Module with VGA / LCD / TV-out / DVI, Audio & LAN

Intel Pentium M Dothan Socket 478 ETX CPU Module with VAG / LCD / TV-out / DVI, Audio & LAN

Using the Blue Chip ETX Evaluation Board will give your single board computer design project a further boost. This ATX based board is a complete platform, equipped with all the usual industry standard connectors which lets you test and evaluate the ETX module in tandem with target baseboard development.
The board includes connectors and interfaces for PS/2 Keyboard and Mouse, USB, Serial, Parallel, Ethernet, Sound, Floppy and IDE. It also supports the connection of a wide variety of visual devices such as Flat Panel TTL/LVDS and CRT displays. The motherboard is expandable via 3 PCI, 1 ISA/PCI and 2 ISA slots and is equipped with both ATX and standard AT power connectors.

The ETX-C3 series is available in CPU speeds of 400MHz, 733MHz and 1GHz. The Via core offers a comprehensive feature set whilst maintaining an exceptionally low power consumption - 6W, 7W and 12W respectively. Onboard functionality is exceptional including LCD, Plasma, CRT 2D & 3D graphics, LAN, Solid State Disk, IDE, USB, Audio, Serial, Parallel and Watchdog. Blue Chip offer full a board support package within the board price.

The H6046 is a compact high-performance, ultra low power ETX module using the Intel Atom Z510/530 CPU and the US15W embedded chipset with integrated graphics and media hardware acceleration. The module has serial ports, USB 2.0 ports, and IDE interface. Ethernet 10/100Mbit, Compact Flash socket, watchdog timer and temperature sensor are other features built into this versatile module. Soldered memory makes the H6046 ideal for rugged applications in harsh environments.

The H6307 is a compact high-performance low power ETX CPU module using Intel Celeron M CPU and Intel 855GME embedded chipset with integrated LCD graphics, serial ports, USB support, disk interface, and watchdog. One 10/100Mbit Ethernet, AC97 audio controller and flash BIOS add to the flexibility of the module. The H6307 is the best choice for COM module applications requiring scalable balance between high performance and low power consumption at competitive cost. H6307 Features • VGA graphics for CRT and LVDS for LCD • Ethernet interface • IDE Ultra 100 hard disk interface • Floppy drive shared with parallel port • Two serial ports • One parallel port • Four USB ports • Keyboard and mouse ports • Intel 855GME • The board supports: • 600MHz /1GHz Celeron M ULV • 1,4Ghz Pentium M LV • 1,8GHz Pentium M

The H6308 is a compact high-performance low power ETX module with AMD Geode LX800 CPU and CS5536 embedded chipset with integrated LCD graphics, serial ports, USB support, disk interface. Ethernet 10/100Mbit, Compact Flash socket, watchdog timer and temperature sensor add to the flexibility of the module. The H6308 is the best choice for COM module applications requiring mid range performance and very low power consumption. H6308 features • Processor with MMX and 3DNow • CS5536 chipset • 10/100Base-T Ethernet Interface • Integrated LCD TFT graphics • USB, IDE, COM and LPT/Floppy ports • Embedded XP, Win CE .NET and Linux support

The H6171 / 72 is a compact high-performance low power ETX module using Intel Pentium M CPU and Intel 855GME/852GM embedded chipset with integrated LCD graphics, serial ports, USB support, disk interface, and watchdog. One 10/100Mbit Ethernet, AC97 audio controller and flash BIOS add to the flexibility of the board. The H6171 ETX module is the best choice for COM module applications requiring scalable balance between high performance and low power consumption at competitive cost. H6171 features • Intel Celeron M, Pentium M 400MHz FSB • Intel 855GME/852GM chipset • VGA graphics for CRT and LVDS • True 16 bit ISA, 32 bit PCI and IDE/CF (on carrier) • H4089 carrier board - XP and Linux BSP

Intel Pentium M ETX Module with VGA/LAN/Audio
FEATURES:
* Intel LV Pentium M or Intel Celeron M ULV processor on board, up to 1.6GHz (Micro-FCBGA)
* 400MHz CPU Operating Frequency
* Intel 82855GME Chipset with integrated VGA supporting VGA CRT and LVDS interface
* One SODIMM socket supports up to 1GB
* Integrated 10/100 Ethernet
* Supports 4 USB 2.0 ports
* PCI to ISA Bridge, ISA High Drive

VIA CN700 / Eden-V4 ETX CPU Module
* Up to 2.0 GHz, 400/533MHz FSB
* DDR2 SODIMM x1, Max. 1GB
* Integrated VGA, 10/100 Ethernet
* 18-bit / 24-bit dual channel LVDS
* USB 2.0 x4, COM x2
* Watchdog timer

ETX CPU Module with Intel Core 2 Duo L7400 or Celeron M 423, VGA, LVDS, PCIe GbE, USB 2.0 and SATA

ETX CPU Module with Intel Pentium M / Celeron M CPU , USB 2.0, LAN and Audio

AMD LX800 Highly Integrated ETX Module

Full Fuction ETX Baseboard with VGA/LVDS/TTL, Audio, CF type II & Digital I/O

ETX®-mgx - with Geode GX1 Processor up to 300 Mhz with Audio, VGA/LCD, 10/10MBit LAN

Intel Pentium III and Celeoron up to 700Mhz, number chrunchers and power savers, featuring the VIA Twister chipset.

ETX® CPU board with Intel Pentium III up to 700 MHz for power demanding applications.

ETX®-P1 - The godfather of ETX®, based on Intel Pentium Processor with MMX technology and ATI-Rage mobility video controller.

ETX®-VE featuring VIA EDEN and C3 Processors, the best price-performance ratio available. ETX-VE with VIA EDEN ESP4000 and ESP6000 and VIA-C3 800MHz Processors.

ETX®-P3m - The fastest ETX® board available!!! 1.2GHz Pentium III-m with up to 1GByte SDRAM. 650/800/933 MHz CPU frequencies also available.

The ETX-PM® products feature the Intel® Pentium M Processor family from the Intel® Centrino Platform. With the unique Enhanced Speed™ Step Architecture Technology, ETX-PM® modules offer supreme computing performance at extreme low power consumption. Supporting up to 1 Gbyte of DDR-SDRAM technology the memory bandwidth is no longer the performance bottleneck. The integrated Intel Extreme Graphics 2 video controller offers resolutions up to 2048 x 1536 pixel with 2D and 3D acceleration.

ETX®-PM - First System-On-Module with Intel® Pentium® M Processor up to 1.8 GHz. Ultimate Performance - Low Heat!

CPU: Intel Pentium® M Processor with up to 1.8 GHz

Memory: 1 GByte DDR-SO-DIMM, PC 2100

Video: Intel® Extreme Graphics2 integrated max. resolution 2048x1536

4 x USB 2.0 channels (full speed)

Consumes 18 Watts at 1.1 GHz, speed and performance compares to a
    2 GHZ Pentium IV

ETX®-P3T - with Intel® Celeron® 400MHz up to 1GHz. Highest performance available in fanless ETX® solution!

The ETX®-LX (Embedded Technology eXtended) is a highly integrated and fast PC module at extreme low power consumption. It is the RoHS alternative for ETX®-mgx and other low power ETX® boards. It allows, due to the used AMD LX800 processor, the usage of the board without active cooling in applications, where space limitations (the maximum height without heat sink is only 10 mm!) are major requirements.

ETX®-LX800 - The first ETX® with AMD LX800 with 500 MHz, graphic, sound, Ethernet and LVDS.

AMD LX800 with 500 MHz - real low power

Embedded Technology eXtended

DDR SODIMM socket for maximum memory

CompactFlash socket for rugged IDE flash

2 x SATA onboard, 4 x USB 2.0 for fast peripherals

RoHS alternative for ETX®-mgx

Compliant to new ETX® 3.0 specification

ETX®-e.lite series based on STPC Elite processors.

ETX®-P3Tx - High performance Graphics and Increased I/O Bandwidth in low power ETX Computer-on-Module

ETX®-Eval, ATX sized evaluation board for ETX®. ATX form factor with four PCI slots and three ISA slots.

ETX®-Starterkit - Complete ETX® Starterkit for immediate evaluation purposes Includes all required hard- and software for a quick start Embedded Technology eXtended.

ETX® miniBaseboard - Full featured miniBaseboard for ETX® modules

The new ETX®-CN8 module is based on the VIA C7® processor and VIA Eden® processor as well as the VIA CN896 and VIA VT 8237 chipset. ETX®-CN8 modules also will provide the following interfaces that are always located in the same physical position on each board, thus guaranteering scalability between modules. It also takes advantage of the new ETX® 3.0 specification that allow for 2 Serial ATA ports without violating the existing ETX® 2.8 pin usage.

ETX® - CN8 - with VIA C7®/ Eden® processor, VIA CN896 and VIA VT 8237. ETX 3.0 - Available Q1 / 2008!

With VIA C7® / Eden® processor, VIA CN 896 and VIA VT 8237

ETX® 3.0 - Long Term Support

2 x Serial ATA for highspeed drivers

Up to 2 GB DDR2 SODIMM memory

Windows® Vista® support

The Kontron ETX®-CD is the new highest performance Computer-On-Module based on the ETX® 3.0 standard. The new ETX®-CD module is built around the Intel® Core™ 2 Duo processor and Intel® Celeron® M processor as well as the Intel 945GM and ICH7M chipset. ETX®-CD modules also will provide the following interfaces that are always located in the same physical position on each board: PCI 2.3, USB 2.0, Serial ATA, Parallel ATA, LVDS as well as an ACPI (Advanced Configuration and Power Interface) for optimized power management.

ETX®-CD with soldered Intel® Core™ 2 Duo Processor L7400 LV (1.5 GHz, 667 FSB, 4 MB L2) - A new dimension in embedded computing has arrived.

Highest performance for Computer On Modules

With Intel® Core™ 2 Duo processor

ETX® 3.0 - Long Term Support

2 x SerialATA for highspeed drives

Up to 2 GB DDR2 SODIMM memory

The ETX®-PM products feature the Intel® Celeron® M Processor or Intel® Pentium® M Processor with the unique Enhanced Speed Step™ technology. The ETX®-PM modules offer supreme computing performance at extreme low power consumption. Supporting up to 1 Gbyte of DDR SDRAM technology the memory bandwith is no longer the performance bottleneck and 2 x SATA for highspeed drives. The integrated Intel® Extreme Graphics 2 video controller offers resolutions up to 2048 x 1536 pixel with 2D and 3D acceleration. The JILI display interface technology ensures automatic setting of the video controller parameters for the attached LCD panel.

ETX®-PM3 - now with ETX® 3.0 long term support. ETX®3.0 module with Intel® Pentium® M Processor LV 738 (1.4 GHz) and Intel® 82855GME, 2 x SATA.

Embedded Technology eXtended

ETX® 3.0 - Long Term Support

Intel® Pentium® M Processors up to 1.8 GHz

SerialATA - for highspeed drives

USB 2.0 and DDR-SDRAM up to 1 GByte

Ultimate Performance without the heat

The ETX®-DC module brings latest 45 nm technology to the well-established ETX® 3.0 form factor. The Intel® Atom™ N270 processor is well-balanced in terms of power consumption, performance and pricing. Especially, long-term availability turns ETX®-DC to become a perfect successor for your existing ETX® designs.

ETX®-DC with latest energy-saving 45 nm technology for ETX 3.0 with Intel® Atom™ N270 processor.

Intel® Atom™ N270 processor with energy-saving 45nm

Fanless use

2 x Serial ATA

Up to 2 GB DDR2 memory

Windows Vista® support

The design of the MSC ETE-CN700 module supports the VIA Eden(V4) and VIA C7 processors combined with the CN700 and 8237R+ bridge components thus enabling new features like DDR memory, USB 2.0, SATA, P-ATA and 10/100MBit Ethernet. Processor speed ranges from 400 MHz to 1.8 GHz.

The MSC ETE-GLX module is based on the AMD® Geode™ LX 800@0.9W (500MHz) in combination with the Geode CS5536 companion chip. It provides a good computing performance while keeping the power consumption very low. Integrated interfaces include LCD TFT graphics, DDR SO-DIMM socket, CompactFlash socket, 10/100Base-TX Ethernet, AC’97 Audio, an IDE port and four USB ports.

The design of the MSC ETE-PM855/CM855 modules supports all variants of the Intel® Embedded Pentium® M and Celeron® M processors up to the latest version with 400 MHz FSB. Integrated interfaces include dual Enhanced IDE, 10/100Base-TX Ethernet, LCD LVDS interface (18 / 24 / 36 / 48 Bit), four USB 2.0 ports, AC’97 Audio, system monitoring, watchdog etc.

The MSC ETE-XSC255 module is based on the Intel® PXA255 processor with Intel® XScale™ technology and ARM v.5TE instruction set architecture. It is suitable for applications requiring lowest power consumption and Flash mass storage.

The ETE-MB-ATX is an ideal platform to develop and prototype the system electronics before it’s integrated in the application using a customer specific baseboard.

The MSC ETE-MB-PISA motherboard is a highly integrated baseboard for ET(e) modules and provides the necessary infrastructure to operate an ETX compatible Embedded PC module.

The MSC ETE-PM8553, -CM8553 and -CM8523 modules support various Intel processors from 600MHz up to 1,8GHz. Two SATA-connectors are located on the module as defined in ETX® Specification 3.0.

The MSC ETE-GLX3 module is based on the AMD® processors Geode™ LX800@0.9W or LX900@1.5W in combination with the Geode CS5536 Companion Chip plus a separate SATA controller. Low power consumption and modern storage interfaces enable versatile applications at moderate cost.

ETX Pentium & Celeron M up to 1.8GHz, Chipset Intel 855GME, up to 1GB DDR RAM on SO-DIMM socket, LVDS interface single & dual channel at 24 bit, 4 USB 2.0, IDE interface and Ethernet.

General Purpose ETX Baseboard for developers. Designed to be the startup platform for any customer that begin to evaluate ETX board's characteristics. IrDA, PC/104 Plus, PCI, Floppy, HDD, LVDS, TV out connectors on board. Front panel connectors: 4x USB, Ethernet, 4x COM, 1 LPT, VGA & 3x Audio.

The M647R is a compact baseboard designed to be an easy solution for the use of ETX modules. With its CC-Talk interface it's suitable for gaming applications. The M647R optionally mount up to 1GB of Flash Disk on board.

The M682R is a compact baseboard designed to be a solution for the use of ETX modules. With its Mini PCI socket soldered on board it’s also suitable for applications that require Wi-Fi connections. Another main feature is the Touch Screen controller integrated which allows to connect 4 wires Touch Screens with PS/2 interface. Its very small dimensions are also the main characteristic that enables the use in a wide range of products of ETX CPU modules.

The M685R module is the newest ETX™ board of SECO that integrates Intel Celeron M and Pentium M processors, Intel 855GME chipset and ATI M9™ graphic controller which offer to the embedded market the fastest and performing 3D graphic applications and high definition for video resolution.